Effectiveness of resin infiltration (ICON) and microabrasion-remineralization technique with two remineralizing agents (Tooth Mousse and Toothmin) on permanent incisor hypoplasia - A randomized clinical trial.

Aims: The study aims to compare the effect of resin infiltration and microabrasion-remineralization (MAb-Re) with Tooth Mousse and Toothmin on permanent incisor hypoplasia. Materials and Methods: The study included children with permanent incisor hypoplasia above 9 years of age, 171 teeth divided randomly into four groups: Group A - ICON, Group B - MAb-Re using Tooth Mousse, Group C - MAb-Re using Toothmin, and Group D - control group. Process involved taking standardized photographs at T1 - before intervention, T2 - immediately after treatment, and T3 - 6-month follow-up. Color evaluation, area calculation, participant and expert opinion using a Likert scale, treatment time, and cost-effectiveness were all taken into consideration during the assessment. Statistical Analysis Used: Data were collected, entered into a computer, and analyzed; one-way ANOVA was used for intergroup assessment. Results: Overall color change was evident immediately after treatment in the ICON group compared to other groups (P < 0.05). However, no significant difference in color change was visible between the groups after 6 months. Reduction in hypoplastic area was seen in all the groups. The mean time was similar for all the groups. Toothmin was found to be the most cost-effective in comparison with the other two interventions. Conclusions: ICON proved to be more effective immediately after treatment for masking incisor hypoplasia. However, at 6-month follow-up interval, all the groups gave similar results.

Management of Multifactorial Stained Enamel Defects on Anterior Dentition Using a Combination Treatment of Whitening, Microabrasion, Resin Infiltration and Resin-based Composite Restoration.

OBJECTIVES: This case report describes a combination treatment composed of tooth whitening, microabrasion, resin infiltration, and resin-based composite restoration to manage multifactorial stained enamel lesions on anterior teeth. CLINICAL CONSIDERATIONS: The patient's primary concern was to improve the esthetics of their smile after about a decade of extensive orthodontic and orthognathic procedures. After clinical evaluation and history taking, the authors determined that the enamel defects were the result of carious and developmental factors. In-office tooth whitening took place in one visit, followed by micro abrasion and resin infiltration in another visit. Thirteen months later, a follow-up visit showed that the results were stable and that the patient was satisfied with the overall outcome. A small resin composite restoration was added at the follow up visit to repair a previous restoration and to reestablish the facial contours of the central incisor. CONCLUSIONS: A combination treatment protocol composed of tooth whitening, microabrasion, and resin infiltration can improve patient satisfaction and avoid unnecessary invasive treatment.

Microabrasion in the management of enamel discolorations in paediatric dentistry: a systematic review.

Structural abnormalities of the anterior teeth could be aesthetically compromising in young patients. The dentist must provide solutions while preserving dental tissue. Microabrasion approach can be a solution. We conducted a systematic literature review to evaluate whether microbrasion treatment in paediatric dentistry can improve aesthetic in cases of pre- or post-eruptive discolorations on tooth enamel. 741 articles published up to September 2021 were selected from 3 databases using the key word "microabrasion". 11 prospective studies including 6 randomized were relevant to the inclusion criteria. Microabrasion appears to be an effective and reliable technique for the management of pre and post enamel discoloration in paediatric dentistry, especially in fluorosis. More high-powered, well-conducted randomized studies with complete evaluation criteria are needed for other types of spots. Standardization of criteria for assessing treatment success and of the protocol required should be explored.

Solução estética conservadora em paciente jovem com fluorose: clareamento e microabrasão: relato de caso / Conservative aesthetic solution in a young patient with fluorosis: whitening and microabrasion: case report

Introdução: a fluorose constitui uma patologia que afeta os dentes desencadeada pelo excesso de ingestão de flúor. Sua manifestação ocorre a nível de esmalte na presença de manchas ou defeitos anatômicos. Objetivo: relatar o manejo clínico de um paciente com fluorose tratado com procedimento minimamente invasivo. Relato do caso: paciente do sexo feminino, 18 anos, apresentando queixas estéticas clinicamente observadas na vestibular dos dentes, com diagnóstico de lesões fluoróticas. Foi executado protocolo de dessensibilização com Ultra EZ por 5 min e aplicação do Verniz (Enamelast Fluoride) previamente ao tratamento clareador. Foram realizados duas sessões de clareamento com peróxido de hidrogenio 35% (DMC) por 45 min com intervalo de sete dias entre elas. Imediatamente após a segunda sessão de clareamento, foi realizado microabrasão com pasta abrasiva Whitness RM (FGM) e taça de borracha com fricção por 20 segundos. Resultados: o tratamento clareador associado a técnica da microabrasão do esmalte demonstrou resultado estético favorável, microinvasivo e eficaz no tratamento da fluorose. Conclusão: a associação dos tratamentos resolveu o problema estético da paciente de forma rápida e segura, conservando a estrutura dentária.

Introduction: fluorosis is a pathology that affects teeth triggered by excess fluoride intake. Its manifestation occurs at the enamel level in the presence of stains or anatomical defects. Objective: to report the clinical management of a patient with fluorosis treated with a minimally invasive procedure. Case report: female patient, 18 years old, presenting aesthetic complaints clinically observed in the buccal of the teeth, with a diagnosis of fluorotic lesions. A desensitization protocol was performed with Ultra EZ for 5 min and Varnish (Enamelast Fluoride) was applied prior to the bleaching treatment. Two bleaching sessions were performed with 35% hydrogen peroxide (DMC) for 45 min, with an interval of seven days between them. Immediately after the second bleaching session, microabrasion was performed with Whitness RM abrasive paste (FGM) and a rubber cup with friction for 20 seconds. Results: The bleaching treatment associated with the enamel microabrasion technique demonstrated a favorable, microinvasive and effective esthetic result in the treatment of fluorosis. Conclusion: the combination of treatments solved the patient's aesthetic problem quickly and safely, preserving the dental structure.

Color Changes Associated with Sandblasting, Hydrofluoric Acid Etching, and Er:YAG Laser Irradiation of Milled Feldspathic Porcelain Laminate Veneers.

OBJECTIVES: To evaluate color changes in milled feldspathic porcelain laminate veneers following hydrofluoric acid etching (HFA), sandblasting (SB), or Er:YAG laser irradiation (LI). METHODS AND MATERIALS: Disc-shaped specimens (thickness=1 mm, diameter=8 mm) were milled from feldspathic porcelain blocks (n=40). Glazed specimens were randomly assigned to four subgroups (n=10 each) according to surface treatment: negative control, HFA, SB, and LI. A layer of translucent, light-cured resin cement (thickness=0.1 mm) was then applied following silanization. The color was characterized by the L*, a*, and b* uniform color space (CIE) using a reflection spectrophotometer. CIEDE2000 (ΔE00) was calculated to determine the color difference between each surface treatment and negative control groups. Data were statistically analyzed using analysis of variance (ANOVA), Kruskal-Wallis, and Dunn-Bonferroni post hoc tests. RESULTS: There were no significant differences in CIEL* and CIEb* coordinates between negative control and all surface treatment groups (p≥0.108). The SB group demonstrated significantly lower mean CIEa* (higher greenish hue) compared to other groups (p≤0.003). HFA exhibited significantly higher CIEa* (closer to red) when compared to LI (p=0.039). LI induced the smallest overall color change compared to negative control (ΔE00=1.43 [1.07]). However, the differences in ΔE00 values were not statistically significant (p=0.648). CONCLUSIONS: The tested surface treatments did not affect the lightness or the yellowness of the 1-mm-thick milled feldspathic porcelain veneers. However, sandblasting resulted in a significant increase in the greenish hue. The Er:YAG laser resulted in the closest ΔE00 (1.43) to the 50:50% perceptibility threshold (ΔE00=1.2).

Effects of microabrasion association to at-home bleaching on hydrogen peroxide penetration and color change.

PURPOSE: This study aimed to quantify the penetration of hydrogen peroxide (HP) inside the pulp cavity and color change with two different concentrations of HP to at-home bleaching associated or not with enamel microabrasion (MA). METHODS: Forty healthy premolars were randomly divided in four groups (n = 10): only HP4%, MA + HP4%, only HP10%, MA + HP10%. The concentration (µg/ml) of HP was assessed using UV-Vis spectrophotometry. The color change (ΔEab , ΔE00 and WID ) was evaluated before and one-week after bleaching. Data were evaluated for a two-way ANOVA and the Tukey's test (α = 0.05). RESULTS: The application of MA increased the amounts of HP inside the pulp chamber when compared to without MA, as well as PH10% when compared to PH4% (p < 0.0001). PH10% showed higher WID when compared to PH4%. No significant difference was observed when ΔEab , and ΔE00 were used. CONCLUSIONS: The enamel MA before at-home bleaching promotes greater penetration of HP, although this procedure did not significantly affect the color change. CLINICAL SIGNIFICANCE: Since greater penetration of HP into the pulp chamber was detected when home bleaching was applied immediately after MA, the clinician should not apply home bleaching gels in the same session when MA was performed.

Case Reports of Enamel Microabrasion Associated with At-home Dental Bleaching After Orthodontic Bracket Removal.

Adequate removal of residual bonded materials from the enamel surface after orthodontic bracket debonding is critical, since any remaining composite may compromise enamel surface morphology and esthetics. The following clinical case reports present the association of at-home dental bleaching using 10% carbamide peroxide and the removal of residual bonded material using a super fine, tapered diamond bur followed by the use of an enamel microabrasion product after orthodontic bracket debonding. The proposed treatment considerably improved the esthetics and successfully removed the grooves created during the removal of the bonding composite, resulting in a smooth enamel surface.

A comparison of resin infiltration and microabrasion for postorthodontic white spot lesion.

INTRODUCTION: The objective of this research was to evaluate and compare the effectiveness of microabrasion and resin infiltration for white spot lesions (WSLs). METHODS: Patients with postorthodontic WSLs were enrolled and randomly assigned to the control, microabrasion, and resin-infiltration groups. Intraoral photographs were taken before and after (6 months later) treatment. WSL sizes were determined through ImageJ (Wayne Rasband, Kensington, Md). Integrated optical density (IOD) was determined for a WSL and its surrounding normal enamel through Image-Pro Plus (version 6.0; Media Cybernetics, Rockville, Md), and their differences of IOD were considered as the IOD surrogate for that WSL. The color change of WSL were measured through ΔE. RESULTS: A total of 27 eligible patients were enrolled; 9 subjects were assigned to each group, resulting in 56 teeth in the control group, 72 in the microabrasion group, and 58 in the resin-infiltration group. The ratios of WSL size (after/before) were similar between the microabrasion and resin-infiltration group (43.94 ± 0.03% vs 45.02 ± 0.03%; P = 0.96 > 0.05), but those of the 2 groups were significantly lower than those of the control group (92.15 ± 0.02%) (P <0.001). Moreover, the ratios of IOD (after/before) were significantly lower in the resin-infiltration group (22.94 ± 0.02%) than in the microabrasion (78.11 ± 0.03%) and control (83.79 ± 0.02%) (P <0.001) groups. The highest ΔE improvement was obtained by infiltration, but there was no significant difference between microabrasion and control group. CONCLUSIONS: Resin infiltration and microabrasion are comparably effective in reducing the sizes of WSL, but resin infiltration enjoys an esthetic advantage over microabrasion.

Microabrasion effect on enamel susceptibility to penetration of hydrogen peroxide: an experimental and computational study.

To evaluate in vitro transenamel/transdentinal of penetration of H2O2 after microabrasive. Computational models were performed to verify peroxide penetration and evaluate if geometric modifications could affect in vitro results. Enamel/dentin blocks from bovine incisors were prepared and randomly divided into groups (n = 15) according with abrasive (35% phosphoric acid and pumice or 6.6% hydrochloric acid and silica) and bleaching agents (16% carbamide peroxide and 35% H2O2). From artificial pulp chambers, the H2O2 concentration was measured and SEM was used for surface morphology. Numerical models were performed (Abaqus® v6.12) modifying slightly enamel/dentin thickness based on experimental data. All groups presented H2O2 penetration, although no significant difference was noted between the control and experimental groups (p > 0.05). The numerical analysis demonstrated the role of dental tissue thickness in the H2O2 penetration. Microabrasion is recommended as its association with bleaching procedures and small modifications in thicknesses of enamel/dentin can cause substantial changes in HP penetration. Such diffusion aspect is clinically relevant for the bleaching procedures since very thin enamel could present more peroxide propagation through dental tissues.

Técnica combinada de microabrasión y blanqueamiento dental para tratamiento de pigmentaciones asociadas a fluorosis. Reporte de un caso / Combined technique of microabrasion and teeth whitening for treatment of surface stains associated with fluorosis. Case Report

La fluorosis dental es una condición irreversible originada durante el desarrollo dental que genera pigmentaciones intrínsecas, alteraciones en el esmalte manifestadas a manera de manchas blancas, amarillas o marrones, que perjudican la estética y repercuten en el desenvolvimiento social. El presente reporte de caso clínico describe la combinación de los procedimientos de microabrasión y blanqueamiento dental, como alternativas en la eliminación de pigmentaciones dentales. Después del diagnóstico de la patología, verificación de ausencia de lesiones pulpares y caries, una explicación minuciosa a la paciente y obtención del consentimiento informado, se realizó limpieza de las superficies dentales y, bajo aislamiento absoluto, se procedió a realizar la técnica de microabrasión mediante ácido clorhídrico al 6,6% siguiendo las instrucciones del fabricante. Concluido el procedimiento y, observando que era posible mejorar aún más la estética, se decidió ejecutar el procedimiento de blanqueamiento dental, a base de peróxido de hidrógeno al 40% en el consultorio, seguido por peróxido de carbamida al 10% aplicado en el domicilio. Al finalizar el tratamiento se observó uniformidad en el color dental, conjugados con una evidente mejora en la calidad de vida y relación social de la paciente. La combinación de procedimientos, como el reportado en este caso, constituye una excelente alternativa de tratamiento para eliminar pigmentaciones fluoróticas moderadas

Dental fluorosis is an irreversible condition caused during dental development that generates intrinsic pigmentation, enamel alterations manifested as white, yellow, or brown spots, which impair aesthetics and have an impact on social development. This clinical case report describes the combination of microabrasion and teeth whitening procedures, as alternatives in the elimination of dental pigmentations. After the diagnosis of the pathology, verification of absence of pulpal lesions and caries, a thorough explanation to the patient and obtaining informed consent; dental surfaces were cleaned and, under absolute isolation, the microabrasion technique was performed using 6.6% hydrochloric acid following the manufacturer's instructions. Once the procedure was concluded and observing that it was possible to improve the aesthetics even further, it was decided to perform the teeth whitening procedure, based on 40% hydrogen peroxide, in the dental office, followed by 10% carbamide peroxide applied at home. At the end of the treatment, uniformity in tooth color was observed, combined with an evident improvement in the quality of life and social relationship of the patient. The combination of procedures, such as that reported in this case, constitutes an excellent treatment alternative to eliminate moderate fluorotic pigmentation

Effects of Microabrasion Prior to In-office Bleaching on Hydrogen Peroxide Permeability, Color Change, and Enamel Morphology.

PURPOSE: This study evaluated hydrogen peroxide (HP) diffusion within the pulp chamber, as well as color change and the surface morphology of teeth subjected to various microabrasion (MA) protocols associated or not with in-office (IO) bleaching. METHODS: Forty sound premolars were randomly divided into the following four groups (n=10): no treatment (NC); IO bleaching only; IO immediately after MA (IMA), and IO seven days after MA (7MA). After treatments, the HP concentration (µg/mL) within the pulp chamber was determined using ultraviolet-visible (UV-Vis) spectrophotometry. The color change (ΔE*) was evaluated using the digital spectrophotometer before and 1 week after bleaching. The surface morphology was evaluated by scanning electron microscope (SEM). Data from each test were submitted to one-way ANOVA and Tukey tests (α=0.05). RESULTS: All experimental groups exhibited higher HP concentrations compared to the NC group (p<0.00001). However, higher amounts of HP were observed for the IMA group compared to the IO and 7MA groups (p<0.00001). No significant difference in color change was observed among the groups (p<0.001). Pronounced grooves in enamel were found in the IMA and 7MA groups. However, enamel erosion areas were observed only in the 7MA group. CONCLUSIONS: The association between MA and IO bleaching could significantly affect the amount of HP inside the pulp chamber. Therefore, it is highly recommended to wait for 1 week after MA procedures before performing IO bleaching.

Clinical Performance of Enamel Microabrasion for Esthetic Management of Stained Dental Fluorosis Teeth.

CLINICAL RELEVANCE: Enamel microabrasion is an effective first-line esthetic treatment for the removal of tooth stains due to fluorosis, with an improvement in the appearance of teeth that is associated with a high level of patient acceptance.

Microabrasión del esmalte. Indicaciones, limitaciones y alcance clínico / Enamel micro-abrasion. Indications, limitations and clinical scope

Existen muchas patologías pigmentarias que alteran la estética del color dentario; algunas de ellas pueden circunscribirse a la superficie externa del esmalte y por ende ser tratadas con una técnica microabrasiva para su eliminación. La indicación de un tratamiento más agresivo en relación al blanqueamiento convencional, dependerá no solo de la ubicación de la lesión, sino también de la severidad de la misma, de la calidad de la estructura del tejido adamantino y de la anatomía dentaria entre muchas otras variables (AU)

ere are many pigment pathologies that alter the aesthetics of tooth color; Some of them can be confined to the outer surface of the enamel and therefore be treated with a microabrasive technique for their removal. e indication of a more aggressive treatment in relation to conventional whitening will depend not only on the location of the lesion, but also on its severity, the quality of the structure of the adamantine tissue and the dental anatomy among many other variables (AU)

Resolução estética de lesões de mancha branca pós-tratamento ortodôntico / Esthetic resolution of white spot lesions after orthodontic treatment

O objetivo deste estudo foi comparar as técnicas de microabrasão de esmalte (ME) e infiltração de resina (IR) em relação à resolução estética de lesões cariosas de mancha branca (LCMB) e avaliar a correlação entre a luminosidade das lesões quando transiluminadas e a resolução do problema (estudo 1); avaliar em um estudo "in vitro", a eficácia do clareamento dental, em amostras de dentes submetidos previamente a IR (estudo 2); avaliar a efetividade do clareamento dental 12 meses após a realização dos protocolos de mínima intervenção, em um estudo de série de casos (estudo 3). Para o estudo 1 foram selecionados 17 pacientes que foram divididos em 2 grupos: ME (N=8) e IR (N=9). Um dente de cada paciente foi fotografado sob condição normal e do mesmo dente com auxilio de dispositivo translume. Em seguida os pacientes foram submetidos às técnicas de mínima intervenção. Após 7 dias de acompanhamento, o mesmo protocolo fotográfico foi realizado. Para resolução estética, foi delimitado a área do dente em relação a área da mancha por software. Para avaliação da cor da mancha quando evidenciada, os valores de luminosidade (L*) das coordenadas L*a*b* foram avaliados antes e após a intervenção, sendo mensurados valores das áreas sadias e área da mancha mais enegrecida. Os dados de correlação foram submetidos ao teste de Person. A resolutividade dos tratamentos foi dada por um Teste t-Student e a diferença de luminosidade antes e após os tratamentos foi dado pelo teste Anova 2 fatores de medidas repetidas (p<0,05). Para o estudo 2, quarenta superfícies de esmalte bovino foram submetidas à desmineralização. Após, foram estabelecidos dois protocolos de manchamento. Vinte espécimes foram imersos em caldo de manchamento por 24 horas (Lab 1) ou 7 dias (Lab 2). Dez corpos-de-prova de cada grupo receberam a aplicação de IR. Todas as amostras foram clareadas com gel de peróxido de carbamida 15% por 14 dias (8 horas diárias). A mensuração da cor foi realizada em espectrofotômetro de refletância em três momentos: inicial, após o manchamento e após o clareamento. Os dados (CIEDE00) foram analisados pelo teste t-Student (p <0,05). Para o estudo 3, foram selecionados 4 voluntários, que tinham LCMB nos dentes anteriores superiores. Os pacientes foram divididos de forma aleatória em dois grupos, sendo estes: ME e IR na área de mancha. Para resolução estética das LCMB, foi determinada a área da mancha em relação a área do dente e a porcentagem da redução pós protocolos. Após 12 meses de acompanhamento, os pacientes receberam clareamento dental, com peróxido de carbamida 10%, durante 21 dias. Os dados do estudo 1 mostram que não houve correlação entre as áreas da mancha (normal e transiluminada) e a resolução estética das mesmas (p>0.05). Em relação a resolutividade, não houve diferença entre os tratamentos (p=0.403). O valor de Luminosidade aumentou após a realização dos procedimentos (p=0.001). Para o estudo 2, nenhuma diferença significativa foi observada no Lab 1 (p=0,560). Para o Lab 2, foram detectadas diferenças significativas (p=0,031). Uma vez que o clareamento foi mais efetivo no grupo não submetido a IR (Lab2). Os resultados do estudo 3 mostram que ambos os protocolos reduziram e/ou suavizaram as áreas das manchas. Após 12 meses de acompanhamento, a técnica de ME apresentou redução no valor da área de mancha. Por fim, o clareamento dental foi efetivo em ambos os protocolos, sem diferenças entre as técnicas. Frente as metodologias propostas, pode-se concluir que: não houve diferenças entre os tratamentos em relação a remoção ou mascaramento das LCMB; a cor das manchas quando transiluminadas não estão relacionadas a resolução estética das mesmas; "in vitro", dentes fortemente manchados, submetidos ao tratamento com RI, o produto parece se comportar como uma barreira semipermeável à penetração do peróxido. Por fim, ambas as técnicas podem ser indicadas para reduzir ou suavizar as áreas de mancha. A ME apresentou redução das áreas de mancha no período avaliado (12 meses). Clinicamente, o clareamento dental pode ser indicado para melhorar a cor dos dentes, independentemente do protocolo pré-estabelecido

The aim of this study was to compare enamel microabrasion (EM) and resin infiltration (RI) techniques in relation to the esthetic resolution of white spot carious lesions (WSL) and to evaluate the correlation between the luminosity of the lesions when transilluminated and the resolution of the problem (study 1); To evaluate in an "in vitro" study, the effectiveness of dental bleaching in samples of teeth previously submitted to RI (study 2); to evaluate the effectiveness of dental bleaching 12 months after the minimal intervention protocols were performed, in a case series study (study 3). For study 1, 17 patients were selected and divided into 2 groups: ME (N=8) and IR (N=9). One tooth from each patient was photographed under normal condition and the same tooth with the aid of a translume device. Then the patients were subjected to the minimal intervention techniques. After 7 days of follow-up, the same photographic protocol was performed. For esthetic resolution, the area of the tooth was delimited in relation to the area of the stain using software. To evaluate the color of the stain when evidenced, the luminosity values (L*) of the coordinates L*a*b* were evaluated before and after the intervention, being measured values of the healthy areas and area of the darker stain. The correlation data were submitted to Person's test. The resolution by the treatments was analyzed by Student's t-test, and the difference in luminosity before and after treatments was analyzed by 2-way repeated measures Anova (p<0.05). For study 2, forty bovine enamel surfaces were subjected to demineralization. Two staining protocols were established. Twenty specimens were immersed in staining broth for 24 hours (Lab 1) or 7 days (Lab 2). Ten specimens from each group received IR application. All specimens were bleached with 15% carbamide peroxide gel for 14 days (8 hours daily). Color measurement was performed by spectrophotometry at three periods: bselien, after staining, and after bleaching. Data (CIEDE00) were analyzed by Student's T test (p <0.05). For study 3, 4 volunteers with WSL in the maxillary teeth were selected. The patients were randomly divided into EM or RI for treating lesions. For esthetic resolution of WSL, the spot area relative to tooth area and the percentage of reduction after protocols were determined. After 12 months of follow-up, the patients received dental bleaching with 10% carbamide peroxide for 21 days. The data from study 1 show that there was no correlation between the stain areas (transilluminated or not) and the esthetic resolution (p>0.05). Regarding resolution, there was no difference between treatments (p=0.403). The Luminosity value increased after the procedures were performed (p=0.001). For study 2, no significant difference was observed in Lab 1 (p=0.560). For Lab 2, significant differences were detected (p=0.031), and whitening was more effective in the group not subjected to IR (Lab2). The results of study 3 show that both protocols reduced and/or softened the areas of the stains. After 12 months of follow-up, the EM technique showed a reduction in the stain area value. Finally, dental bleaching was effective with both protocols, with no differences between the techniques. Based on the proposed methodologies, it can be concluded that: there were no differences between the treatments regarding the removal or masking of WSL; the color of the stains when transilluminated is not related to their esthetic resolution; "in vitro", heavily stained teeth submitted to treatment with RI, the product seems to behave as a semi-permeable barrier to peroxide penetration. Finally, both techniques can be indicated to reduce or soften stained areas. The EM showed a reduction of stained areas in the evaluated period (12 months). Clinically, dental bleaching can be indicated to improve the color of teeth, regardless of the pre-established protocol

Weight-loss and surface roughness of enamel after microabrasion procedure with different agents / Perda de peso e rugosidade da superfície do esmalte após procedimento de microabrasão com diferentes agentes

Introduction: Enamel microabrasion is achieved by abrasion of the enamel surface and it is a quick, practical and efficient procedure. Objective It was assessed the weight loss and surface aspect of enamel after microabrasion procedures with commercial and mixtures made in-office. Material and method Eighty bovine incisors were divided into four groups (n=10): OpalustreTM (6.6% HCl + silicon carbide); Whiteness RMTM (6% HCl + silicon carbide); 37% H3PO4 + pumice and 10% HCl + pumice. Treatment was performed by 15 applications of 10s duration. The enamel weight loss was determined by the difference in weight before and after the microabrasion. The surfaces were analyzed by a surface roughness equipment and scanning electron microscopy. Data were submitted to paired-T test, one-way ANOVA and Tukey tests (α=0.05). Result It was observed significantly weight loss for all groups. The difference in weight loss ranged from 0.037±0.012 for group 37% H3PO4 and from 0.054±0.009 for group 6,6% HCl. There was a significant increase in surface roughness for all groups and 10% HCl group showed the lower results (0.65±0.09). It was observed different patterns of enamel morphology by SEM images. Conclusion The in-office mixtures resulted in the lowest enamel structure loss (37% H3PO4) and the lowest surface roughness (10% HCl).

Introdução: A microabrasão do esmalte é realizada através da abrasão da superfície do mesmo, apresentando-se como um procedimento rápido, prático e eficiente. Objetivo Avaliar a perda de peso e o aspecto superficial do esmalte após procedimentos de microabrasão com agentes comerciais e não comerciais. Material e método Oitenta incisivos bovinos foram divididos em quatro grupos (n = 10): OpalustreTM (6,6% HCl + carboneto de silício); Whiteness RMTM (6% HCl + carboneto de silício); 37% H3PO4 + pedra-pomes e 10% HCl + pedra-pomes. O tratamento foi realizado em 15 aplicações de 10s de duração. A perda de peso do esmalte foi determinada pela diferença de peso antes e depois da microabrasão. As superfícies foram analisadas por equipamento de rugosidade superficial e microscopia eletrônica de varredura. Os dados foram submetidos ao teste T-pareado, ANOVA one-way e teste de Tukey (α = 0,05). Resultado Foi observada perda de peso significativa para todos os grupos, a diferença na perda de peso variou de -0,037±0,012 para o grupo 37% H3PO4 a -0.054±0.009 para o grupo 6.6% HCl. Houve um aumento significativo na rugosidade da superfície para todos os grupos e o grupo 10%HCl apresentou os resultados mais baixos (0,65±0,09). Foram observados diferentes padrões de morfologia do esmalte por meio de imagens MEV. Conclusão Os agentes não comerciais resultaram na menor perda de estrutura do esmalte (37% H3PO4) e na rugosidade superficial (10% HCl).

Effect of hydrochloric acid commercial presentation for microabrasion technique on loss of enamel structure and surface / Efeito da apresentação comercial de ácido clorídrico para técnica de microabrasão na perda de estrutura e superfície do esmalte

Introdução: A técnica de microabrasão pode ser realizada através de pasta pronta para uso, disponível comercialmente, ou o profissional pode manipulá-la no consultório. Objetivo: Verificar o efeito da apresentação comercial do ácido clorídrico a 10% na manipulação de pasta para microabrasão sobre a superfície do esmalte. Metodologia: Foram selecionados incisivos bovinos e divididos em dois grupos, de acordo com a apresentação comercial do ácido clorídrico (líquido ou em gel). O tratamento foi realizado através de dez aplicações com 10s de duração cada, intercaladas por lavagem de 10s. Vinte incisivos (n=10) foram utilizados para se determinar a perda de estrutura do esmalte. Cada amostra foi pesada, em balança analítica, antes e após submissão à microabrasão. Outras 20 amostras (n=10) foram utilizadas para determinação da rugosidade superficial média (Ra) utilizando-se um rugosímetro. Três amostras de cada grupo do experimento anterior foram selecionadas, aleatoriamente, e outras três amostras adicionais foram preparadas como controle (baseline) para análise em MEV. Resultados: Verificou-se diferença estatística significativa entre a massa final e a inicial e rugosidade superficial das amostras, independente da apresentação comercial do ácido. Nas imagens de MEV observou-se presença de superfície regular para o grupo controle (baseline). Nas demais imagens verificou-se superfície com considerável irregularidade e dissolução discreta do esmalte. Conclusões: O tratamento realizado causou perda significativa de estrutura e aumentou a rugosidade superficial dos espécimes, independente da apresentação comercial do ácido e sem apresentar diferença entre os grupos ao final. A apresentação comercial do ácido não parece ser um fator a interferir no tratamento. (AU)

Introduction: The microabrasion technique can be performed using a commercially available paste, or the dentist can prepare it in his office. Objective: To verify the effect of hydrochloric acid commercial presentation in the handling of microabrasion paste on the enamel surface. Methodology: Bovine incisors were divided into two groups, according to the commercial presentation of 10% hydrochloric acid (liquid or gel). The treatment was carried out through ten applications of 10 s duration each, intercalated with a 10s wash. Twenty teeth (n=10) were used to determine the loss of enamel structure. Each sample was weighed on an analytical balance before and after submission to microabrasion. Another 20 teeth (n=10) were used to determine the average surface roughness (Ra) using a rugosimeter. Three samples from each group of the previous experiment were selected, randomly, and another three additional samples were repared as a control (baseline) for SEM analysis. Results: There was a statistically significant difference between the final and initial mass and the surface roughness of the samples, regardless of the acid commercial presentation. In the SEM images, a regular surface was observed for the control group (baseline). In the other images, there was a surface with considerable irregularity and a slight dissolution of the enamel. Conclusions: The treatment carried out. (AU)

Minimally invasive esthetic management of dental fluorosis: a case report.

Dental fluorosis is a dental condition caused by excessive intake of fluoride during enamel formation, which can lead to color abnormalities or defects on the tooth surface. The resultant abnormal appearance ranges in severity from mildly white and opaque to dark brown, which substantially affects patients' esthetic characteristics and self-confidence. Treatment methods include tooth whitening or restoration. This clinical report describes the use of a minimally invasive esthetic technique in a 22-year-old woman with moderate dental fluorosis. The treatment plan included enamel microabrasion, at-home bleaching for 2 weeks, and subsequent resin infiltration for each tooth under a rubber dam. After 2 years of follow-up, evaluation of the patient's esthetic appearance revealed that teeth affected by dental fluorosis could be successfully treated with a minimally invasive technique involving microabrasion, at-home bleaching, and resin infiltration.

Minimally invasive aesthetic treatment of white spots by dental fluorosis in children: case report

The presence of white spots due to dental fluorosis can cause aesthetic discomfort, being one of the factors for a search for dental treatment. Objective: Report a clinical case in which the aesthetic complaint was solved through the association of the dental bleaching to the microabrasion technique. Case report: Male patient, 13 years, attended to the Integrated Clinic of the School of Dentistry of the Federal University of Rio de Janeiro, with fluorosis, mainly in the antero-superior teeth and aesthetic complaint. Initially, it was made an immediate bleaching with hydrogen peroxide at 35%, in 3 sessions of 15 minutes each, to soften the disparity of shades between tooth-stain. The result was insufficient and the dental microabrasion technique was adopted. A pumice paste was applied together with gel of phosphoric acid at 37% under relative isolation, in a total of 8 applications (1 minute each). At the end of each application, it was made an abundant water washing, microengine mounted fine-grained disc polishing and topical application of neutral NaF2 in gel (4 minutes each application) to eliminate possible postoperative sensitivity. Conclusion: The dental bleaching and the microabrasion technique promoted satisfactory immediate clinical results that increased self-esteem of the patient in a minimally invasive way to dental structure.

Introdução: A presença de manchas brancas por fluorose dentária pode causar desconforto estético, sendo um dos fatores para busca de tratamento odontológico. Objetivo: Relatar um caso clínico em que a queixa estética foi resolvida através da associação do clareamento dentário à técnica de microabrasão. Relato do caso: Paciente do sexo masculino, 13 anos, compareceu a Clínica Integrada da Faculdade de Odontologia da UFRJ, com fluorose, principalmente nos dentes ântero-superiores e queixa estética. Inicialmente, realizou-se clareamento imediato com peróxido de hidrogênio a 35%, em 3 sessões de 15 minutos, para suavizar a disparidade de tons entre mancha-dente. O resultado obtido foi insuficiente e a técnica de microabrasão dentária foi adotada. Uma pasta de pedra pomes foi aplicada juntamente com gel de ácido fosfórico a 37% sob isolamento relativo, perfazendo um total de 8 aplicações (1 minuto cada). Ao final de cada aplicação, foi realizada lavagem abundante com água, polimento com disco de granulação fina montado em micromotor e aplicação tópica de NaF2 neutro em gel (4 minutos cada aplicação) para eliminar possível sensibilidade pós-operatória. Conclusão: O clareamento dentário e a técnica de microabrasão promoveram resultados clínicos imediatos satisfatórios que elevaram a autoestima do paciente, de maneira minimamente invasiva para estrutura dentária.

Investigation of the esthetic outcomes of white spot lesion treatments.

OBJECTIVE: The present study compared the ability of bleaching, resin infiltration and microabrasion to restore the appearance of existing white spot lesions (WSL) on tooth surfaces as close as possible to that of the original healthy enamel. MATERIALS AND METHODS: Sixty extracted human teeth with WSL were randomly assigned to three treatment groups (20/group). Prior to treatment, the colour of the surrounding healthy enamel and the WSL were measured as the baseline and pre-treatment (PreRX) colours respectively using spectrophotometer based on CIE L*A*B. The L-value was used for the statistical comparison. WSLs in each group were treated respectively by bleaching, infiltration or microabrasion following the manufacturer's instructions. Colour measurement was repeated after treatment. Both intragroup and intergroup comparisons were performed using ANOVA followed by Tukey's multiple comparison test (α=0.05). RESULT: In all groups the mean L-values were significantly higher in PreRX WSL (P < 0.01; Tukey) compared to baseline (sound enamel). After treatment the difference in mean L-value between baseline and WSL increased significantly (P < 0.01, Tukey) in Bleaching and Microabrasion groups by 1.4% and 1% respectively, but decreased in Infiltration group by 3.4%. Thus resin infiltration decreased the L-value of the WSL, bringing it closer to the L-value of the sound enamel while bleaching and microabrasion increased the L-value. CONCLUSIONS: Among the three treatment modalities investigated in this study, resin infiltration was the most effective in masking the WSLs.

Dental Bleaching, Microabrasion, and Resin Infiltration: Case Report of Minimally Invasive Treatment of Enamel Hypoplasia.

Enamel hypoplasia occurs because of a defect in formation of the organic matrix during the development of tooth enamel. Minimally invasive procedures of the slightly altered enamel contribute to a greater longevity of teeth and prevent them from relapsing into the repetitive restorative cycle. This case history report aimed to show a sequential technique of minimally invasive procedures for esthetic resolution in anterior teeth. Prior to microabrasion, anterior teeth were bleached in office with 37% hydrogen peroxide. Afterwards, hypoplastic spots on the buccal incisal thirds of the maxillary central incisors were treated with two sessions of microabrasion using phosphoric acid and pumice stone and one session using resin infiltrant. Besides a slight remaining white spot on tooth 21, the masking of spots was done with this sequence of treatments, re-establishing color harmony. Spot depth, diagnosis, and the most relevant treatment choice determined the clinical success.